| Chimes & Doorbells |  |
| Safety & Security | |
| Search | |
| Contact Us | |
|  |  |
|  |
 |
 | | Alarm Sensor | |
- Detects conventional alarm sounds from existing security systems to activate transmission of a signal to the security system or emergency dialer unit (SLED1) , which then activates the system.
- Can stand alone, or can be used in conjunction with the Skylink security system.
- Can be connected with other security systems using a N/C connector.
- 9V Alkaline battery included.
- Range up to 100ft.
|
|
| | Door/Window Sensor | |
| | Flood Sensor | |
- Detects overflow/flood when placed along the basement wall, near water heater, washing machine, etc.
- Notifies the control panel or emergency dialer (SLED1) if water is detected.
- Works in conjunction with the Skylink security system.
- Easy to install.
- 12V Alkaline battery included.
- Range up to 100ft.
|
|
| | Motion Sensor | |
- Uses Passive Infrared technology for immediate detection of intruders.
- Works in conjunction with the Skylink security system.
- Monitors an area up to 40 feet by an arc of 110 degrees.
- On/Test mode selection.
- 9V Alkaline battery included.
- Range up to 100ft.
|
|
| | Temperature Sensor | |
- Monitors temperature of a specific area (i.e. greenhouse, storage room, etc.).
- This unit will sound and send a signal to the control panel or emergency dialer unit when temperatures climb above or fall below a preset level.
- Features an adjustable temperature range (0oF to 159oF) Can stand alone, or be used in conjunction with the Skylink security system.
- Can be connected with other security systems using a N/C connector.
- Easy to install.
- 6V Lithium battery included.
- Range up to 100ft.
|
|
| | Vibration Sensor | |
|
|
 |  |
|
